welcom to magicsee tv box
News
  • news
  • Rtcently to do
Rtcently to do

How to upgrade tv box via USB Burning Tool

Date: 2018-01-30
浏览次数: 17627

 

 

These days, Most of Magicsee Android TV boxes are making it easier to update firmware by using OTA. But sometimes If your firmware is badly damaged, and can’t access the recovery mode, then an OTA firmware upgrade isn’t going to do you much good.


A few months ago, we have written an article showing How to Upgrade Android 7.1 on your tv box via SD card.

Here’s is another method install a new firmware image manually by using the Amlogic USB Burning Tool.

1:First you need to make the following preparations

(1)The USB cable

(2)A toothpick or metal pin (something can insert into the recovery port)

(3)Download the firmware and USB burning tool, download link below:

 firmware download link:

http://www.magicsees.com/help.aspx

 

USB_Burning_Tool download link:

https://mega.nz/#!5Lgm3Rha!h-8gF-fljEhFet_oX7cwqLyJ3Wa0u9qMsIVaLthBFYU

 

2:Install and start the USB_Burning_Tool

Upgrade C300 Hybird tv box to Android 7.1.2 via USB Burning Tool

 

3. Make sure that your device is powered offpressing the reset button in the AV hole with a toothpick or pin whilst plug the USB key into the player to connect the PC

 Upgrade C300 Hybird tv box to Android 7.1.2 via USB Burning Tool     Upgrade C300 Hybird tv box to Android 7.1.2 via USB Burning Tool

 

Then plug in the power cable with the AV reset button still pressed,here you should make sure power on.

Don’t worry if this takes a little effort,you should hold on to see the”connect success” screen appear

 

Upgrade C300 Hybird tv box to Android 7.1.2 via USB Burning Tool

 

4. Click on File->Import image and select your specific .img firmware for your C300 hybird tv box.

Upgrade C300 Hybird tv box to Android 7.1.2 via USB Burning Tool


Never disconnect the power to your TV box while upgrading the firmware. This can “brick” the device and turn it into a really expensive paperweight.

 

Upgrade C300 Hybird tv box to Android 7.1.2 via USB Burning Tool

 

5. Setting Configuration

On the right hand side, you’ll see a large “Start” button with some options underneath. Select “Normal Erase” and click the Start button to begin the process.

Always use the “Normal Erase” configuration option – unless you really know what you’re doing. If you choose to erase the MAC address, you could end up doing more harm than good.

Upgrade C300 Hybird tv box to Android 7.1.2 via USB Burning Tool

 

This process should take from a few seconds to a few minutes, depending on the speed of your PC.

 

 

 Upgrade C300 Hybird tv box to Android 7.1.2 via USB Burning Tool

 

6. Once the status bar turns green and reads 100%, the process is done!

 

As you can see, the entire thing took just over four minutes on my PC.

 Upgrade C300 Hybird tv box to Android 7.1.2 via USB Burning Tool


7. Now Restart you TV BOX,enjoy your time.

 

 


 

News / Recommended news More
2018 - 07 - 07
Magicsee C300 support cccam newcam gscam powervu and Biss,but sometimes it is a bit time consuming to edit manuallyso we offer a format file to help customers to import your biss and powervu keys quickly and easily.BissAndPowervuKeys.cfg Format file download:  (umcompress first after download)6366658069206250001803287.zip
2017 - 12 - 04
If you want to upgrade your Magicsee iron tv box to the latest and greatest operating system - Android 7.1.2 Nougat . Here we provide several steps to help you make it.  1:First you need to make the following preparations⑴The capacity of more than 2GB TF Card⑵TF Card reader⑶A metal pin(4)Download the firmwear and burn card maker, download link below: IRON+ Android 7.1.2 firmware 201...
2017 - 08 - 08
Android TV boxes have come a long, long way since I started this site back in 2013.In fact, streaming devices and cord-cutting in general have come a long way, too.Think about it.Going back to 2013, the third generation Roku was released in spring of that year.Chromecast came out in the summer. The Amazon FireTV and Nexus Player wouldn’t come out until 2014. The NVIDI...
2017 - 08 - 15
How To Update Kodi On Magicsee Iron Android TV Box  This article will teach you how to update Kodi on Android TV Box by using Google Play Store that comes installed with most devices. Magicsee Iron  Most of the time when you purchase an Android TV Box, it will more than likely have Kodi loaded but it will be out of date.  Since Kodi comes out with new updates on a frequent...
Copyright ©2005 - 2013 深圳市麦视科技有限公司英文新站
犀牛云提供云计算服务
Address: 302,B11 building,Yintian Industrial Park, Bao'an District,Shenzhen,GuangDong Province,China
Phone: 86 0755-2653 2142
E-mail : info@magicsee.cc
邮编:330520
  • Your Name:
  • *
  • Company Name:
  • *
  • Address:
  • *
  • Telephone:
  • *
  • Fax:
  • *
  • E-mail:
  • *
  • Post Code:
  • *
  • Consulting Theme:
  • *
  • Description:
  • *
在线留言 FEEDBOOK
Our attention Our attention
  • Mobile phone website
  • The official micro-blog